Biến tần Veichi AC70E-S2-1R5P 1 Pha 220V

Liên hệ

Công suất 1.5kw
Điện áp vào 1 pha 220Vac, ra 3 pha 220Vac
Chế độ điều khiển: V/F, Vector vòng hở
Truyền thông: RS485, Modbus
Bảo hành: 2 năm
Ứng dụng: Phù hợp cho các động cơ có mức tải nhẹ, công suất nhỏ

Khuyến mãi

DEAL HOT!!! Biến tần Shihlin Đài Loan giá chỉ 1 TRIỆU/chiếc. Đăng ký nhận ưu đãi ngay TẠI ĐÂY

Mô tả sản phẩm

Thông số chung của biến tần Veichi AC70E

Items			Specifications
Power	Voltage/frequency		Single phase 220V 50/60Hz Three phase380V 50/60Hz
	Allowable fluctuations		voltage:±15%, frequency:±5%
Control	Frequency range		0-400Hz
	Frequency ACCuracy		±0.5% of max frequency
	Frequency setting resolution		0.01Hz:Operating“up”and”down”keys on keyboard 0.2Hz:Potentiometers analog input
	Voltage/frequency characteristics		Voltage 50% -100% the rated voltage adjustable, Motor rated frequency 25-400Hz(2000Hz) adjustable
	Carrier frequency		1.0-15.0KHz/Random carrier modulation
	Torque upgrade		0–25.0% adjustable/auto torque upgrade/random V/F curve optional
	Maximum Capacity		150% for one minute, 180% for 2s, 200% instant jump.
	ACC and DECtime		0.1-6500s
	Rated output voltage		Take advantage of the power supply voltage compensation function, if motor rated voltage is 100%,the voltage can be set in the 50 -100% scope(the voltage output should not exceed the input voltage )
	AVR adjust		When the grid voltage fluctuates, changes in the output voltage is very small, remained constant V / F
	Automatic energy-saving operation		ACCording to the load conditions, automatic optimize the V / F curves to implement energy saving operation
	Standard functions		PID control, ACC and DECtime adjustable, ACC and DECmode variable, Carrier frequency adjustment, Torque upgrade, Current limiting, Speed tracking and restart, Frequency hopping, Frequency fluctuation limite control, Program running, Multi-steps speed, Pendulum frequency operation, RS485, Analog output, Pulse output frequency
	Brake		Energy-consuming braking, DC braking
	Frequency setting input		Keyboard number settings, keyboard potentiometers/ external terminal VS: 0~10V, the external terminal AS : 4-20mA, RS485 and signal composition and terminal options
	Signal Feedback input		External terminal VS: 0~10V external terminal AS: 4-20mA, RS485
	Input order signals		Start, stop, positive and negative rotating , jog, multi-steps speed, free parking, reset, ACC and DECtime choice, frequency settings channels choice, external malfunctions alarm
	External output signal		Relay output, the collector output, 0-10V output, 4-20mA output, the frequency pulse output
Protection function			Overvoltage, undervoltage, current limiting, over-current, overload, electric thermal relays, overheat, pressure stall, data protection
Display		Setting		Function number/data
		Running		Output frequency, give frequency, output current, input voltage, output voltage, motor speed, PID feedback, quantitative PID, module temperature, input and output terminal
		Fault		Overvoltage, undervoltage, overcurrent, short circuit, phase missing, overload, heat, pressure stall, current limiting, data protection is damaged, current fault operating conditions, historical fault
Condition		Installation sites		Indoor, elevation of not more than 1000 m, no corrosive gases
		Temperature, humidity		-10—+40℃, 20%—90%RH(No condensation)
		Vibration		Below 20Hz less than 0.5g
		Storage Temperature		-25—+65℃
		Installation mode		Wall-mounted mode
		Protection degree		IP20
		Cooling Mode		Forced air-cooling

Biến tần Veichi AC70E-S2-1R5P 1 Pha 220V

Sản phẩm mua kèm

Đăng ký tài khoản

Đăng nhập